ChinaAutoRegs

GB 5763-2018 English Translated Brake linings for automobiles Standard No.: GB 5763-2018 English Name: Brake linings for automobiles Chinese Name: 汽车用制动器衬片 Issued by: Ministry of Ecology and Environment Issued on: 2018-11-19 Implemented on: 2019-10-01 Language: English Format: PDF 1 SCOPE  This standard specifies the terms and definitions, basic requirements concerning health and safety, test methods, inspection rules as well as marking, packaging, transportation and storage of brake linings for automobiles.  This standard applies to brake linings for automobiles (hereinafter referred to as linings). 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 5620 Road vehicles - braking of automotive vehicles and their trailers - Vo...

GB 36886-2018 English Translated Limit and measurement methods for exhaust smoke from non-road mobile machinery equipped with diesel engine Standard No.: GB 36886-2018 English Name: Limit and measurement methods for exhaust smoke from non-road mobile machinery equipped with diesel engine Chinese Name: 非道路移动柴油机械排气烟度限值及测量方法 Issued by: Ministry of Ecology and Environment Issued on: 2018-11-19 Implemented on: 2018-12-01 Language: English File Format: PDF 1 Application scope This standard specifies the limits and measurement methods for exhaust smoke from non-road mobile machinery equipped with diesel engine and onboard diesel engine equipment. This standard applies to the inspection for exhaust smoke from non-road mobile machinery equipped with diesel engine and onboard diesel engine equipment. The inspection on exhaust smoke from newly-produced and imported non-road mobile machinery equipped with diesel engine may be carried out by reference to this standard. This s...

GB 18285-2018 English Translated Limits and measurement methods for emissions from gasoline vehicles under two-speed idle conditions and simple driving mode conditions Standard No.: GB 18285-2018 English Name: Limits and measurement methods for emissions from gasoline vehicles under two-speed idle conditions and simple driving mode conditions Chinese Name: 汽油车污染物排放限值及测量方法（双怠速法及简易工况法） Issued by: Ministry of Ecology and Environment Issued on: 2018-11-19 Implemented on: 2019-04-01 Superseding: GB 18285-2005 Language: English File Format: PDF 1 SCOPE  This Standard specifies the limits and measurement methods for emissions from gasoline vehicles under two-speed idle conditions, steady-state mode, transient mode and simple transient mode. This standard also prescribes the methods for visual inspection, OBD check and Evaporative Emission Control System (EECS) test of gasoline vehicles, and their determination criteria. This Standard applies to inspection for n...

GB 3847-2018  Limits and measurement methods for emissions from diesel vehicles under free acceleration and lugdown cycle Standard No.: GB 3847-2018 English Name: Limits and measurement methods for emissions from diesel vehicles under free acceleration and lugdown cycle Chinese Name: 柴油车污染物排放限值及测量方法（自由加速法及加载减速法） Issued by: Ministry of Ecology and Environment Issued on: 2018-11-19 Implemented on: 2019-04-01 Superseding: GB 3847-2005 Language: English File Format: PDF 1 SCOPE  This Standard specifies the limits and measurement methods for exhaust emissions form diesel vehicles under free acceleration and lug down cycle.  This standard also prescribes the methods for visual inspection and OBD check of diesel vehicles, and their determination criteria.  This Standard applies to inspection for new produced diesel vehicle at end of production line, inspection for register vehicle and inspection for in-use vehicle.  This Standard also a...

GB/T 18954-2017 English Translated Methods of setting running resistance on a chassis dynamometer for motorcycles and mopeds Standard No.: GB/T 18954-2017 English Name: Methods of setting running resistance on a chassis dynamometer for motorcycles and mopeds Chinese Name: 摩托车和轻便摩托车底盘测功机行驶阻力的设定方法 Issued by: AQSIQ and SAC Issued on: 2017-07-31 Implemented on: 2018-2-1 Language: English File Format: PDF Delivery: Immediate delivery 1 SCOPE  This Standard specifies the methods of setting running resistance on a chassis dynamometer for motorcycles and mopeds. This Standard applies to motorcycles and mopeds (hereinafter referred to as “motorcycle”). 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 5378 Methods of road test f...

GB 11567.2-2001 English Translated Motor vehicles and trailers-Rear underrun protection requirements Standard No.: GB 11567.2-2001 English Name: Motor vehicles and trailers-Rear underrun protection requirements Chinese Name: 汽车和挂车后下部防护要求 Issued by: AQSIQ and SAC Issued on: 2001-08-02 Implemented on: 2002-5-1 Language: English File Format: PDF Delivery: Immediate delivery 1 SCOPE This standard specifies the technical requirements and lest method for rear underrun protections of motor vehicles and trailers. 1.1 The standard applies to: PART I: Rear Underrun Protective Devices (RUPDs) which are intended to be fitted to vehicles of categories N2, N3, and O3 and O4. PART II: the installation on vehicles of categories N2, N3, and O3 and O4 of RUPDs which have been approved to Part I of this standard; PART III: Vehicles of categories N2, N3, and O3 and O4 equipped with an RUPD which has not been separately approved according to Part I of this standard or so...

GB 11567.1-2001 English Translated Motor vehicles and trailers-Lateral protection requirements  Standard No.: GB 11567.1-2001 English Name: Motor vehicles and trailers-Lateral protection requirements Chinese Name: 汽车和挂车侧面防护要求 Issued by: AQSIQ and SAC Issued on: 2001-8-2 Implemented on: 2002-5-1 Language: English File Format: PDF Delivery: Immediate delivery 1 SCOPE This standard specifies technical requirements for lateral protection of motor vehicles and trailers, so as to offer effective protection to unprotected road users against the risk of falling under the sides of the vehicle and being caught under the wheels. This standard applies to Categories N2, N3, O3 and O4 vehicles. This standard does not apply to the following vehicles: - Semi-trailer tractors; - Trailers specially designed and constructed for the carriage of very long loads of indivisible length, such as limber, steel bars, etc.; - Vehicles designed and constructed for special pu...

GB 15083-2006  English Translated  Strength requirement and test of automobile seats their anchorages and any head restraints Standard No.: GB 15083-2006 English Name: Strength requirement and test of automobile seats their anchorages and any head restraints Chinese Name: 汽车座椅、座椅固定装置及头枕强度要求和试验方法 Issued by: AQSIQ and SAC Issued on: 2006-9-1 Implemented on: 2007-2-1 Language: English File Format: PDF Delivery: Immediate delivery 1. SCOPE This Standard stipulates the terminologies and definitions, requirements and test methods of automobile seats, their anchorages and any head restraints. This Standard applies to the seats and their anchorages of motor vehicles in Category M1, and Categories N (regardless of whether equipped with head restraint), and the partitioning devices of Category M1 vehicle that used to protect occupants from displaced luggage. This Standard also applies to the seats of other motor vehicles in Category M2 and M3 that are not sp...

GB 7063-2011 English Translated The wheel guards of motor vehicles Standard No.: GB 7063-2011 English Name: The wheel guards of motor vehicles Chinese Name: 汽车护轮板 Issued by: AQSIQ and SAC Issued on: 2011-5-12 Implemented on: 2012-1-1 Language: English File Format: PDF Delivery: Immediate delivery 1. SCOPE The Standard provides the technical conditions for the wheel guards of motor vehicles. The Standard is specified to be applicable to category M1 motor vehicles. 2. NORMATIVE REFERENCES The following Standards contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. For undated references, the latest edition of the normative...

GB/T 19949.2-2005 English Translated Road vehicle—Airbag components—Part2:Testing of airbag modules Standard No.: GB/T 19949.2-2005 English Name: Road vehicle—Airbag components—Part2:Testing of airbag modules Chinese Name: 道路车辆 安全气囊部件 第2部分：安全气囊模块试验 Issued by: AQSIQ and SAC Issued on: 2005-10-8 Implemented on: 2006-4-1 Language: English File Format: PDF Delivery: Immediate delivery 1 SCOPE This part of GB/T 19949 establishes the test methods for airbag modules in road vehicles and specifies environmental testing procedures and requirements for airbag modules. Part 3 of GB/T 19949 covers testing of inflator assemblies. 2 NORMATIVE REFERENCES The following standards contain provisions which through reference in this text, constitute provisions of this part of GB/T 19949. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are e...

GB/T 19949.1-2005 Translated English Road vehicle—Airbag components—Part1:Vocabulary Standard No.: GB/T 19949.1-2005 English Name: Road vehicle—Airbag components—Part1:Vocabulary Chinese Name: 道路车辆 安全气囊部件 第1部分：术语 Issued by: AQSIQ and SAC Issued on: 2005-10-8 Implemented on: 2006-4-1 Language: English File Format: PDF Delivery: Immediate delivery 1 SCOPE This part of GB/T 19949 establishes the terminology for the airbag components of road vehicles, for use in reference to test methods, environmental test procedures and requirements for these components. It also lists commonly used abbreviations of terms. 2 TERMS AND DEFINITIONS For the purpose of this part of GB/T 19949, the following terms and definitions apply. 2.1 Ageing test Long term environmental exposure or accelerated ageing at high temperature to determine material and performance changes with time. -------------------- > The above standard is Readily Available in English. > Purcha...

QC/T 655-2005 Translated English Specifications of brakes for motorcycles and mopeds   Standard No.: QC/T 655-2005 English Name: Specifications of brakes for motorcycles and mopeds Chinese Name: 摩托车和轻便摩托车制动器技术条件 Issued by: NDRC Issued on: 2007-11-14 Implemented on: 2008-5-1 Language: English File Format: PDF Delivery: Immediate delivery 1 Scope   The standard specifies the classifications, requirements, test methods, inspection rules, marking and packing of brake assembly and its parts of motorcycles and mopeds (hereinafter referred to as brake).   The standard applies to brake assembly and its parts of motorcycles and mopeds. 2 Normative References   The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this ...

QC/T 727-2007 Translated English Instrument for automobile and motorcycle Standard No.: QC/T 727-2007 English Name: Instrument for automobile and motorcycle Chinese Name: 汽车、摩托车用仪表 Issued by: NDRC Issued on: 2007-11-14 Implemented on: 2008-5-1 Language: English File Format: PDF Delivery: Immediate delivery 1 Scope This standard specifies classification, requirements, testing methods, rules for inspection, marking, package, storage and care of instruments for automobiles and motorcycles (referred to as instruments for short hereunder). This standard applies to speedometer, speed counter, fuel gauge, thermometer, pressure gauge, voltmeter and ammeter for automobiles and motorcycles, and may be referred to by instruments for other motor vehicles. 2 Normative References The following normative documents contain provision which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, a...

QC/T 62-2007 Translated English Shock absorber for motorcycle and moped   Standard No.: QC/T 62-2007 English Name: Shock absorber for motorcycle and moped Chinese Name: 摩托车和轻便摩托车减震器 Issued by: NDRC Issued on: 2007-03-06 Implemented on: 2007-9-1 Language: English File Format: PDF Delivery: Immediate delivery 1. Scope  This standard specifies the technical requirements, test methods, inspection rules, product marking, packing, transportation and storage of shock absorbers for motorcycles and mopeds. This standard is applicable to shock absorbers for motorcycles and mopeds which are composed of damping spring, damper and connection fittings. The relevant provisions contained in the standard also apply to the non-hydraulic damper and racing bicycle shock absorber. 2. Normative Reference The following documents contain provisions which, through reference in this text, constitute requirements of this Standard. For dated reference, subsequent amendment...

QC/T 793-2007 Translated English Specifications and test methods of air filters for motorcycles and scooters   Standard No.: QC/T 793-2007 English Name: Specifications and test methods of air filters for motorcycles and scooters Chinese Name: 摩托车和轻便摩托车空气滤清器技术条件与试验方法 Issued by: NDRC Issued on: 2007-11-14 Implemented on: 2008-5-1 Language: English File Format: PDF Delivery: Immediate delivery 1 Scope The Standard specifies specifications, test methods, inspection rules, marking, packing, transportation and storage of air filters for motorcycles and scooters.  The Standard is applicable to air filter assembly for motorcycles and scooters with displacement of no more than 250ml. The Standard also applies to the air filter assembly of motorcycles with displacement of more than 250ml. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, sub...

QC/T 235-2008 Translated English Specification and test methods for exhaust muffler of motorcycles and mopeds  Standard No.: QC/T 235-2008 English Name: Specification and test methods for exhaust muffler of motorcycles and mopeds Chinese Name: 摩托车和轻便摩托车排气消声器技术要求和试验方法 Issued by: NDRC Issued on: 2008-6-4 Implemented on: 2008-11-1 Language: English File Format: PDF Delivery: Immediate delivery 1. Scope  This standard specifies the technical requirements, test methods, inspection rules, marking, packing transportation and storage of motorcycles and mopeds (hereinafter referred to as motorcycle). This standard is applicable to the exhaust mufflers of motorcycles. 2. Normative References The following documents contain provisions which, through reference in this text, constitute requirements of this Standard. For dated reference, subsequent amendments (exclusive of the content of corrigenda) to, or revisions of, these publications do not apply. However, ...