跳至主要内容

GB/T 20234.1-2015 Translated English Connection set for conductive charging of electric vehicles―Part 1:General requirements [China Electric Vehicle Standard]

GB/T 20234.1-2015 English Translated Connection set for conductive charging of electric vehicles―Part 1:General requirements

Standard No.: GB/T 20234.1-2015

English Name: Connection set for conductive charging of electric vehicles―Part 1:General requirements
Chinese Name: 电动汽车传导充电用连接装置 第1部分:通用要求
Issued by: AQSIQ AND SAC
Issued on: 2015-12-28
Implemented on: 2016-1-1
Superseding: GB/T 20234.1-2011 Connection set for charging - Conductive charging of electric vehicles Part 1: General requirement
Language: English
File Format: PDF
Delivery: Immediate delivery

1 SCOPE


This part of GB/T 20234 specifies the definitions, requirements, test methods and inspection rules of connection set for conductive charging of electric vehicles (EV).

This part is applicable to the connection set for conductive charging of electric vehicles, as follows:
– Up to 690V (AC rated voltage), 50 Hz, at a rated current not exceeding 250 A;
Up to 1,000V (DC rated voltage), at a rated current not exceeding 400 A.
If the plug and socket-outlet of connection set for charging employs the standardized plug and socket complying with GB 2099.1 and GB 1002, this part does not apply to these plugs and socket-outlets.
Note: Vehicles involved in this part refer to plug-in electric vehicles.

2 NORMATIVE REFERENCES


The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.


GB 1002 Single Phase Plugs and Socket-outlets for Household and Similar Purposes - Types, Basic Parameters and Dimensions 

GB 2099.1 Plugs and Socket-outlets for Household and Similar Purposes - Part 1: General Requirements 
GB/T 3956 Conductors of Insulated Cables 
GB 4208 Degrees of Protection Provided by Enclosure (IP Code) 
GB/T 5013.4 Rubber Insulated Cables of Rated Voltages Up to and Including 450/750 V - Part 4: Cords and Flexible Cables 
GB/T 5023 (All Parts) Polyvinyl Chloride Insulated Cables of Rated Voltages Up to and Including 450/750V 
GB/T 11918.1-2014 Plugs, Socket-outlet and Couplers for Industrial Purposes - Part 1: General Requirements
GB/T 18487.1 Electric Vehicle Conductive Charging System - Part 1: General Requirements
GB/T 19596 Terminology of Electric Vehicles

3 TERMS AND DEFINITIONS


For the purpose of this document, the following terms and definitions and those contained in GB/T 19596, GB/T 18487.1 and GB/T 11918.1-2014 apply.



-----------

> The above standard is Readily Available in English. Immediate delivery after receiving payment.
> Purchase Process:
Inquiry - Quotation/Profoma Invoice - Send Sample Pages - Immediate Delivery after Payment.
-----------------------------------------------------------------------------------
Please contact chinaautoregs@gmail.com or sales@chinaautoregs.com for the Complete English Translated Version of Chinese Standard in PDF/WORD Format.

评论

此博客中的热门博文

China National Vehicle GB Standards Translated English 英文版 翻译

English Translated Version of Chinese Standard China Automotive GB Standards/Regulations (Readily Available)        GB 18352.6-2016        Limits and Measurement Methods for Emissions from Light-Duty Vehicles (CHINA 6) GB 17691-2018    Limits and Measurement Methods for Emissions from Diesel Fuelled Heavy-Duty Vehicles (CHINA VI) GB 7258-2017      Technical Specifications for Safety of Power-driven Vehicles Operating on Roads GB/T 24158-2018      General Specifications for Electric Motorcycles and Electric Mopeds GB/T 18655-2018      Vehicles, Boats and Internal Combustion Engines – Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of On-Board Receivers GB/T 35789.1-2017     General Specification for the Electronic Identification of Motor Vehicles - Part 1: Automobile GB/T 35790.1-2017 ...

GB 7258-2017 Translated English 英文版 翻译 Technical specifications for safety of power-driven vehicles operating on roads

GB 7258-2017  Technical specifications for safety of power-driven vehicles operating on roads Standard No.: GB 7258-2017 English Name: Technical Specifications for Safety of Power-driven Vehicles Operating on Roads Chinese Name: 机动车运行安全技术条件 Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China & Standardization Administration of the People's Republic of China Issued on: 2017-09-29 Implemented on: 2018-1-1 Superseding: GB 7258-2012 Safety specifications for power-driven vehicles operating on roads Language: English File Format: PDF Delivery: Immediate delivery CONTENTS Foreword Introduction 1 Scope 10 2 Normative References 10 3 Terms and Definitions 11 4 Complete Vehicle 17 5 Engine and Drive Motor 29 6 Steering System 29 7 Braking System 30 8 Lighting, Signaling Devices and Other Electrical Equipment 38 9 Running System 43 10 Transmission System 45 11 Bodywork 46 12 Sa...

GB 18352.6-2016 English Translated 英文版 翻译 Limits and Measurement Methods for Emissions from Light-Duty Vehicles (CHINA 6)

GB 18352.6-2016 [O fficial Version ] Limits and Measurement Methods for Emissions from Light-Duty Vehicles (CHINA 6) Standard No.: GB 18352.6-2016 English Name: Limits and measurement methods for emissions from light-duty vehicles(CHINA 6) Chinese Name: 轻型汽车污染物排放限值及测量方法(中国第六阶段) Issued by: Ministry of Environmental Protection of the People's Republic of China and General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Issued on: 2016-12-23 Implemented on: 2020-7-1 Superseding: GB 18352.5-2013 Limits and measurement methods for emissions from light-duty vehicles (CHINA 5) Language: English File Format: PDF Delivery: Immediate delivery CONTENTS Foreword 1 Scope 2 Normative References 3 Terms and Definitions 4 Pollution Control Requirements 5 Type Test 6 Extensions to Type Test 7 Conformity of Production 8 In-service Conformity 9 Implementation of the Standard Annex A (Normative) Information ...