GB/T 18487.2-2017 Translated English Electric Vehicle Conductive Charging System Part 2: EMC Requirements for Off-board Electric Vehicle Supply Equipment

GB/T 18487.2-2017 English Translated Electric Vehicle Conductive Charging System Part 2: EMC Requirements for Off-board Electric Vehicle Supply Equipment 

Standard No.: GB/T 18487.2-2017
English Name: Electric Vehicle Conductive Charging System Part 2: EMC Requirements for Off-board Electric Vehicle Supply Equipment
Chinese Name: 电动汽车传导充电系统 第2部分：非车载传导供电设备电磁兼容要求
Issued by: AQSIQ AND SAC
Issued on: 2017-12-29
Implemented on: 2018-7-1
Superseding: GB/T 18487.2-2001 Electric vehicle conductive charging system - Electric vehicles requirements for conductive connection to an A.C/D.C.supply
Language: English
File Format: PDF
Delivery: Immediate delivery

1 SCOPE 

This part of GB/T 18487 specifies the electromagnetic compatibility (EMC) requirements for off-board conductive charging supply equipment (hereinafter referred to as “supply equipment”) for electric vehicles (EV). For the power supply of supply equipment, the maximum rated voltage is 1,000V AC or 1,500V DC, and the maximum rated output voltage is 1,000V AC or 1,500V DC.
This part applies to the supply equipment in charging modes 2, 3 and 4 as specified in GB/T 18487.1.
This part applies to the supply equipment supplied from the on-site energy storage system (e.g. buffer batteries, etc.). 
Cables where there is no electronics or no switching (except for manual switches) are considered as passive and are deemed to comply with the emission and immunity requirements of this part without any need for testing.
This part doesn’t apply to any components or equipment of on-board supply equipment or power supply system for EVs.
This part doesn’t apply to any supply equipment which charges or supplies EVs in wireless power transfer (WPT) mode.
This part doesn’t apply to trolley buses, railway vehicles, industrial vehicles, or supply equipment mainly intended for non-road vehicles.

2 NORMATIVE REFERENCES

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 4365 Electrotechnical Terminology-Electromagnetic Compatibility 
GB 4824-2013 Industrial, Scientific and Medical (ISM) Radio-frequency Equipment - Electromagnetic Disturbance Characteristics - Limits and Methods of Measurement
GB/T 6113.102 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods - Part 1-2: Radio Disturbance and Immunity Measuring Apparatus-Ancillary Equipment - Conducted Disturbances 
GB/T 6113.201 Specification for radio disturbance and immunity measuring apparatus and methods-Part 2-1: Methods of measurement of disturbances and immunity-Conducted disturbance measurements
GB/T 17215.321 Electricity Metering Equipment (AC) - Particular Requirements - Part 21: Static Meters for Active Energy (Classes 1 and 2) 
GB 17625.1 Electromagnetic Compatibility – Limits - Limits for Harmonic Current Emissions (Equipment Input Current 16 A per Phase) 
GB 17625.2 Electromagnetic Compatibility (EMC) – Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-voltage Supply Systems, for Equipment with Rated Current  16 A per Phase and not subject to Conditional Connection
GB/T 17625.7 Electromagnetic Compatibility – Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-voltage Supply Systems for Equipment with Rated Current  75 A and subject to Conditional Connection 
GB/T 17625.8 Electromagnetic Compatibility – Limits - Limits for Harmonic Currents Produced by Equipment Connected to Public Low-voltage Systems with Input Current >16 A and  75 A per Phase 
GB/T 17626.2 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test 
GB/T 17626.3 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test 
GB/T 17626.4 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test 
GB/T 17626.5 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test 
GB/T 17626.6 Electromagnetic Compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-Frequency Fields
GB/T 17626.8 Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test 
GB/T 17626.11 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
GB/T 17626.29 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Voltage Dips Short Interruptions and Voltage Variations on DC Input Power Port Immunity Tests
GB/T 17626.34 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests for Equipment with Mains Current more than 16 A per Phase
GB/T 17799.1 Electromagnetic Compatibility - Generic Standards - Immunity for Residential, Commercial and Light-Industrial Environments
GB/T 17799.2 Electromagnetic Compatibility - Generic Standards - Immunity for Industrial Environments
GB 17799.3 Electromagnetic Compatibility (EMC) - Generic Standards - Emission Standard for Industrial Environments
GB 17799.4 Electromagnetic Compatibility (EMC) - Generic Standards - Emission Standard for Industrial Environments
GB/T 18487.1 Electric Vehicle Conductive Charging System - Part 1: General Requirements
GB/T 18655 Vehicles, Boats and Internal Combustion Engines - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of On-board Receivers 
GB/T 19596 Terminology of Electric Vehicles 
GB/T 29317 Terminology of Electric Vehicle Charging/Battery Swap Infrastructure
GJB 151B-2013 Electromagnetic Emission and Sensitivity Requirements and Measurement of Devices and Subsystems for Military
CISPR 32: 2015 Electromagnetic Compatibility of Multimedia Equipment - Transmission Requirements 
IEC 61000-4-3 Electromagnetic Compatibility (EMC) – Part 4-3: Testing and Measurement Techniques – Radiated, Radio-Frequency, Electromagnetic Field Immunity Test


-----------
> The above standard is Readily Available in English. Immediate delivery after receiving payment.
> Purchase Process:
Inquiry - Quotation/Profoma Invoice - Send Sample Pages - Immediate Delivery after Payment.
-----------------------------------------------------------------------------------
Please contact chinaautoregs@gmail.com or sales@chinaautoregs.com for the Complete English Translated Version of Chinese Standard in PDF/WORD Format.