GB/T 18487.1-2015 English Translated 英文版 翻译 Electric vehicle conductive charging system―Part 1:General requirements

GB/T 18487.1-2015 English Translated_Electric vehicle conductive charging system―Part 1:General requirements 

Standard No.: GB/T 18487.1-2015
English Name: Electric vehicle conductive charging system―Part 1:General requirements
Chinese Name: 电动汽车传导充电系统 第1部分：通用要求
Issued by: AQSIQ AND SAC
Issued on: 2015-12-28
Implemented on: 2016-1-1
Superseding: GB/T 18487.1-2001 Electric vehicle conductive charging system - Part 1: General requirements
Language: English
File Format: PDF
Delivery: Immediate delivery

1 SCOPE

This part of GB/T 18487 specifies classification, general requirements, communications, protection against electric shock, connection between EV and EV supply equipment (EVSE), special requirements for vehicle coupler, plug and socket-outlet, EV supply equipment constructional requirements, performance requirements, overload protection and short circuit protection, emergency disconnect, service conditions, repair, marking and instructions for electric vehicle conductive charging system.
This part applies to the EV supply equipment which provides off-board conductive charging for EV, e.g. AC charging spot, off-board charger and connection set for charging electric vehicle, etc., with a rated supply voltage up to 1,000 V AC or up to 1,500 V DC, and a rated output voltage up to 1,000 V AC or up to 1,500 V DC.
This standard also applies to EV supply equipment supplied from on-site storage systems (e.g. buffer batteries).
Additional requirements may apply to EVSE designed for specific environments or conditions, i.e.:
a) EV supply equipment located in hazardous areas where flammable gas or vapor, fuels or other combustible or explosive materials are present;
b) EV supply equipment designed to be installed at an altitude of more than 2,000 m.
This part is not applicable to safety aspects related to maintenance of electric vehicle conductive charging system, or the on-board charging equipment specified in ISO 17409, or the power supply equipment of trolley buses, rail vehicles, and industrial vehicles and vehicles designed primarily for use off-road.

2 NORMATIVE REFERENCES

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 1002 Single Phase Plugs and Socket-outlets for Household and Similar Purposes – Types, Basic Parameters and Dimensions
GB 1003-2008 Three Phases Plugs and Socket-outlets for Household and Similar Purposes – Types, Basic Parameters and Dimensions
GB 2099.1 Plugs and Socket-outlets for Household and Similar Purposes – Part 1: General Requirements
GB 7251.1-2013 Low-voltage Switchgear and Controlgear Assemblies – Part 1: General Rules (IEC 61439-1:2011, IDT)
GB 10963.1-2005 Electrical Accessories – Circuit-breakers for Overcurrent Protection for Household and Similar Installation – Part 1: Circuit-breakers for AC Operation (IEC 60898-1:2002, IDT)
GB 14048.2-2008 Low-voltage Switchgear and Controlgear – Part 2: Circuit-breakers
GB 14048.3-2008 Low-voltage Switchgear and Controlgear – Part 3: Switches, Disconnectors, Switch-disconnectors and Fuse-combination Units (IEC 60947-3:2005, IDT)
GB/T 14048.4-2010 Low-voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-starters – Low-voltage Electromechanical Contactors and Motor Starters (including Motor Protector)
GB 16895.3-2004 Electrical Installations of Buildings – Part 5-54: Selection and Erection of Electrical Equipment – Earthing Arrangements, Protective Conductors and Protective Bonding Conductors (IEC 60364-5-54:2002, IDT)
GB 16916.1-2014 Residual Current Operated Circuit-breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCB) – Part 1: General Rules (IEC 61008-1:2002, MOD)
GB/T 16935.1-2008 Insulation Coordination for Equipment within Low-voltage Systems – Part 1: Principles, Requirements and Tests (IEC 60664-1:2007, IDT)
GB/T 17045-2008 Protection against Electric Shock – Common Aspects for Installation and Equipment (IEC 61140:2001, IDT)
GB/T 19596-2004 Terminology of Electric Vehicles
GB/T 20234.1-2015 Connection Set of Conductive Charging for Electric Vehicles - Part 1: General Requirements
GB/T 20234.2-2015 Connection Set of Conductive Charging for Electric Vehicles – Part 2: AC Charging Coupler
GB/T 20234.3-2015 Connection Set of Conductive Charging for Electric Vehicles – Part 3: DC Charging Coupler
GB/T 21711.1-2008 Electromechanical Elementary Relays – Part 1: General and Safety Requirements (IEC 61810-1:2003.IDT)
GB 22794-2008 Type B Residual Current Operated Circuit-breakers with and without Integral Overcurrent Protection for Household and Similar Uses (Type B RCCBs and Type B RCBOs) (IEC 62423:2007, IDT)
GB/T 27930-2015 Communication Protocols between Off-board Conductive Charger and Battery Management System for Electric Vehicle
GB/T 28569-2012 Electric Energy Metering for Electric Vehicle AC Charging Spot
GB/T 29317-2012 Terminology of Electric Vehicle Charging/Battery Swap Infrastructure
GB/T 29318-2012 Electric Energy Metering for Electric Vehicle Off-board Charger
GB 50057-2010 Design Code for Protection of Structures against Lightning
IEC 60269 (All Parts) Low-Voltage Fuses
IEC 60898 (All Parts) Electrical Accessories – Circuit-Breakers for Overcurrent Protection for Household and Similar Installations
IEC 60947-6-2:2007 Low-Voltage Switchgear and Controlgear – Part 6-2: Multiple Function Equipment – Control and Protective Switching Devices (or Equipment) (CPS)
IEC 61009-1:2013 Residual Current Operated Circuit-Breakers with Integral Overcurrent Protection for Household and Similar Uses (RCBOs) – Part 1: General Rules
IEC 6185l-23 Electric Vehicle Conductive Charging System – Part 23: DC Electric Vehicle Charging Station
IEC 62477-1:2011 Safety Requirements for Power Electronic Converter Systems and Equipment – Part 1: General


-----------
> The above standard is Readily Available in English. Immediate delivery after receiving payment.
> Purchase Process:
Inquiry - Quotation/Profoma Invoice - Send Sample Pages - Immediate Delivery after Payment.
-----------------------------------------------------------------------------------
Please contact chinaautoregs@gmail.com or sales@chinaautoregs.com for the Complete English Translated Version of Chinese Standard in PDF/WORD Format.