ChinaAutoRegs

GB/T 12547-2009  Minimum Stable Speed Test Method for Motor Vehicles 1 SCOPE  This standard specifies the test method of minimum stable speed for motor vehicles. This standard is applicable to motor vehicles. Combination vehicles may use this standard as a reference. 2 NORMATIVE REFERENCES The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative documents referred to applies. GB/T 12534 Motor Vehicles - General Rules of Road Test Method  GB/T 12543 Motor Vehicles - Acceleration Performance - Test Method GB/T 12677 Motor vehicles - Te...

GB/T 12544-2012  Measurement of Maximum Speed of Motor Vehicles 1 SCOPE  This Standard specifies the test methods for maximum speed of motor vehicles. This Standard applies to motor vehicles other than electric vehicles. The combination vehicles may use this standard as a reference. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 12428 Laden Mass Calculating Method for Buses GB/T 12534 Motor Vehicles - General Rules of Road Test Method 3 TERMS AND DEFINITIONS For the purpose of this document, the following terms and definitions apply.  3.1 Maximum speed “Maximum speed” means the maximum steady speed the vehicle can maintain according to the specified test methods. --------------------------------------- Pleas...

GB/T 12543-2009 Acceleration Performance Test Method for Motor Vehicles 1 SCOPE  This standard specifies the test methods for acceleration performance of motor vehicles. This standard is applicable to the vehicles of categories M and N. 2 NORMATIVE REFERENCES The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative documents referred to applies. GB/T 12534 Motor Vehicles-General Rules of Road Test Method GB/T 12428 Laden Mass Calculation of Buses GB/T 12545.1 Measurement methods of Fuel Consumption for Passenger Cars GB/T 12545.2 Commercial v...

GB/T 12535-2007 Motor Vehicle - Starting Performance - Test Method 1 SCOPE  This standard specifies the test methods of automobile engine start-up and warm-up as well as vehicle starting performance.  This standard is applicable to all kinds of motor vehicles. 2 NORMATIVE REFERENCES The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative documents referred to applies. GB/T 12534-1990 Motor Vehicles-General Rules of Road Test Method 3 TERMS AND DEFINITIONS For the purpose of this standard, the following terms and definitions apply. ...

GB/T 37471-2019  Intelligent Transportation Systems - Lane Change Decision Aid Systems - Performance Requirements and Test Procedures 1 SCOPE This standard specifies the classification, function and performance requirements, and test requirements for lane change decision aid systems (LCDAS). This standard is applicable to, in the case of driving in forward direction, the LCDAS installed in the vehicles of Category M (including M1, M2 and M3) and Category N (including N1, N2 and N3), but not applicable to the similar systems installed in the vehicles of Category O (including O1, O2, O3 and O4) and Category L (including L1, L2, L3, L4 and L5). 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply. GB 7258-2012 Safety specifications for power-driven veh...

GB/T 37436-2019   Intelligent Transportation Systems - Extended-Range Backing Aid Systems - Performance Requirements and Test Procedures 1 SCOPE This standard specifies the function and performance requirements and test requirements for the extended-range backing aid systems (ERBA). This standard is applicable to light-duty vehicles, mainly including passenger cars and commercial vehicles (e.g. minibus and general purpose goods vehicle, etc.), motorcycles excluded, by reference to the classification of vehicles set out in GB/T 3730.1. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply. GB/T 21436-2008 Parking Distance Monitoring and Warning Device for Motor Vehicles ISO 15006 Road vehicles - Ergonomic aspects of transport information and co...