ChinaAutoRegs

GB/T 12539-2018 Motor Vehicles Steep Hill Climbing Test Method   汽车爬陡坡试验方法 1 SCOPE This standard specifies the test conditions, test methods and test results of steep hill climbing test for motor vehicles. This standard is applicable to motor vehicles, other than electric vehicles, while the combination of vehicles may use this standard as a reference. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply. GB/T 12534 Motor vehicles－General rules of road test method 3 TERMS AND DEFINITIONS For the purpose of this standard, the following terms and definitions apply. 3.1 Climbing success 3.2 Maximum gradability --------------------------------------- Please contact chinaautoregs@gmail.com / sales@chinaautoregs.com for the Complete Eng...

English Translated Version of Chinese GB Standards/Regulations (Readily Available) GB 18352.6-2016 Limits and Measurement Methods for Emissions from Light-Duty Vehicles (CHINA 6) GB 17691-2018 Limits and Measurement Methods for Emissions from Diesel Fuelled Heavy-Duty Vehicles (CHINA VI) GB 18285-2018 Limits and Measurement Methods for Emissions from Gasoline Vehicles under Two-Speed Idle Conditions and Short Driving Mode Conditions GB 3847-2018 Limits and Measurement Methods for Emissions form Diesel Vehicles under Free Acceleration and Lug down Cycle GB/T 37437-2019 Frontal Airbag - Technical Requirements of Protection for out of Position Occupant GB/T 12539-2018 Motor Vehicles Steep Hill Climbing Test Method  GB 23255-2019 Photometric Characteristics of Daytime Running Lamps for Power Driven Vehicles GB 15742-2019 Performance Requirements and Test Methods of Horn for Motor Vehicles GB 5920-2019 Photometric Characteristics of Front and Rear Position Lamps,...

GB/T 37474-2019 English Translated 英文版 翻译 Methods and Requirements of Airbag System Abuse Test for Automobile   汽车安全气囊系统误作用试验的方法和要求 1 SCOPE This standard specifies the methods and requirements of airbag system abuse test for motor vehicles. This standard is applicable to Category M1 vehicle which is equipped with airbag system and of which the minimum ground clearance exceeds 100mm in the state of mass in running order. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply. GB/T 19949.1 Road Vehicle - Airbag Components - Part 1: Vocabulary JC/T 899 Concrete curbs 3 TERMS AND DEFINITIONS For the purpose of this standard, the terms and definitions given in GB/T 19949.1 and the following apply. 3.1 Airbag system 3.2 Airbag control...