ChinaAutoRegs

GB/T 5169.11-2017  Fire hazard testing for electric and electronic products—Part 11: Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products (GWEPT)   CONTENTS  Foreword Introduction 1 Scope 2 Normative References 3 Terms and Definitions 4 Test Specimens 5 Test Apparatus 6 Verification of the Temperature Measuring System 7 Conditioning 8 Test Procedure 9 Observations and Measurements 10 Evaluation of Test Results 11 Test Report 12 Information to be Given in the Relevant Product Standard Annex A (Informative) Suggested GWEPT Temperatures Bibliography 1 SCOPE  This part of GB/T 5169 specifies a test method on an end product. It is intended to simulate the effects of thermal stresses produced by an electrically heated source to represent a fire hazard. This test method is used to check that, under defined test conditions, an end product exposed to an electrically heated source has either a lim...

GB/T 17676-1999  Natural Gas Vehicle and Liquefied Petroleum Gas Vehicle Identification Marks   1 SCOPE This standard specifies the identification marks for compressed natural gas (CNG), liquefied natural gas (LNG), adsorbed natural gas (ANG) and liquefied petroleum gas (LPG) vehicles. This standard applies to all types of CNG, LNG, ANG and LPG vehicles. 2 NORMATIVE REFERENCES GB/T 3181-1995 Color Standard for Paint Film 3 IDENTIFICATION MARK Identification marks shall be legible, conspicuous, water-proof and anti-corrosion. 3.1 Graphics 3.1.1 NG vehicles -------------------- > The above standard is Readily Available in English. > Purchase Process: Inquiry - Quotation - Sample Verification - Immediate Delivery after Payment. --------------------------------------- Please contact chinaautoregs@gmail.com or sales@chinaautoregs.com for the Complete English Translated Version of Chinese Standard in PDF/WORD Format.

GB 27999-2014  Fuel Consumption Evaluation Methods and Targets for Passenger Cars  1 SCOPE This standard specifies the evaluation methods and targets for the fuel consumption of vehicle type and the corporate average fuel consumption of passenger cars. This standard applies to all Category M1 vehicles with a maximum design total mass not exceeding 3,500kg, including gasoline or diesel fuelled vehicles, battery electric vehicles, fuel cell vehicles, plug-in hybrid electric vehicles and gaseous fuel vehicles. This standard doesn’t apply to the vehicles that are fuelled with alcohol ether fuels only. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply. GB/T 18386 Electric Vehicles - Energy Consumption and Range - Test Procedures GB/T 19233 Meas...

GB/T 37337-2019  Protection of the Occupants in the Event of a Lateral Pole Collision 1 SCOPE This standard specifies the technical requirements and test methods for the protection of the occupants in the event of a lateral pole collision. This standard applies to the vehicles of Category M1. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply. GB 14166 Safety-belts, restraint systems, child restraint systems and ISOFIX child restraint systems for occupants of power-driven vehicles GB 14167 Safety-belt anchorages, ISOFIX anchorages systems and ISOFIX top tether anchorages for vehicles ISO 6487 Road vehicles - Measurement techniques in impact tests - Instrumentation 3 TERMS AND DEFINITIONS For the purpose of this standard, the following terms a...

GB/T 27840-2011  Fuel Consumption Test Methods for Heavy-Duty Commercial Vehicles 1 SCOPE This Standard specifies the test methods for fuel consumption of heavy-duty commercial vehicles. This Standard applies to the commercial vehicles fuelled by gasoline or diesel with a maximum design mass exceeding 3,500 kg. 2 NORMATIVE REFERENCES The following documents are essential for the application of this document. For dated references, only the dated edition applies. For undated references, the latest edition (including all the amendments) applies. GB/T 1413 Series 1 freight containers―Classification, dimensions and ratings GB/T 1884 Crude Petroleum and Liquid Petroleum Products - Laboratory Determination of Density - Hydrometer Method GB/T 3730.1 Motor vehicles and trailers – Types - Terms and definitions GB/T 12534-1990 Motor vehicles－General rules of road test method GB/T 15089 Classification of power-driven vehicles and trailers GB/T 18297-2001 Performance te...

GB 23255-2019 Photometric characteristics of daytime running lamps for power driven vehicles Standard No.: GB 23255-2019 Chinese Name: 机动车昼间行驶灯配光性能 English Name: Photometric characteristics of daytime running lamps for power driven vehicles 1. SCOPE This Standard specifies the technical requirements, test methods and inspection rules for the photometric characteristics of daytime running lamps for motor vehicles. This Standard applies to all types of daytime running lamps for use with Category M and Category N motor vehicles. The daytime running lamps referred to in this Standard are also referred to as lamps. 2. NORMATIVE REFERENCES The following Standards contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the p...

GB 15742-2019 Performance requirements and test methods of horn for motor vehicles Standard No.: GB 15742-2019 Chinese Name: 机动车用喇叭的性能要求及试验方法 English Name: Performance requirements and test methods of horn for motor vehicles 1 SCOPE This standard specifies the performance requirements and test methods for horns supplied with direct current and compressed air, which are intended for fitting to motor vehicles, and for horns installed on motor vehicles. This standard applies to motor vehicles of categories of M, N, L3, L4 and L5. 2 NORMATIVE REFERENCES The following standards contain provisions, which, through reference in this text, constitute provisions of this standard. At time of publication the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. IEC 651--1979 Acoustimeter IEC 22...

GB 5920-2019 Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers Standard No.: GB 5920-2019 Chinese Name: 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能 English Name: Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers 1 SCOPE This standard specifies technical requirements, test method and inspection rules on relevant photometric characteristics of front and rear position lamps, end- outline marker lamps and stop lamps for motor vehicles and trailers. This standard applies to various types of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and trailers of categories M, N and O. In this standard, the various signal lights mentioned above are also called device. 2 NORMATIVE REFERENCES The following Standards contain provisions which through reference in this text, constitute ...

GB/T 34658-2017 Conformance Test for Communication Protocols between Off-Board Conductive Charger and Battery Management System for Electric Vehicle CONTENTS  Foreword Introduction 1 Scope 2 Normative References 3 Terms and Definitions 4 Abbreviations 5 Conformance Test Requirements 6 Conformance Test System 7 Conformance Test Content Annex A (Normative) Static Documents of Protocol Conformance Test 1 SCOPE  This standard specifies the requirements, system and content of conformance testing for communication protocols between off-board conductive charger (hereinafter referred to as “charger”) and battery management system (hereinafter referred to as “BMS”) for electric vehicle. This standard applies to the protocol conformance testing for the products that are declared to conform to the requirements of GB/T 27930-2015. 2 NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated...